2005-2010 Mustang BMR Progressive Springs 1.25 front / 1.75 rear
BMR springs are specifically designed to provide optimal handling without sacrificing ride quality. The front springs are progressive wound to provide variable rates. The soft portion of the progressive winding maintains near OE ride quality. When the suspension is loaded during aggressive cornering, the springs enter into the stiffer portion of the spring. We have designed additional spring rate into this portion of the spring for better control and reduced body roll. The rear springs are linear wound with the same proven spring rate as OE. BMR springs are available in two variations. Part number SP009 will lower the front 1.25" and the rear 1.75". Part number SP010 lowers the front 1.5" and the rear 2". Both kits are designed to "level" the car.
BMR rear springs retain the factory "hourglass" shape designed by Ford engineers. This important feature provides a "variable natural frequency" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other "road race" oriented companies simply because they don't realize it's benefits in multi-purpose applications.
Beware of low cost springs that sag over time. BMR springs are cold wound from high tensile strength chrome-silicon-vanadium to provide the longest lasting, most consistent rate possible without long term "memory" loss. Always check the spring manufacturers warranty before purchasing, you definitely get what you pay for. BMR provides a lifetime warranty against spring sag.
NOTE: Sold in BMR red only.
2005 2006 2007 2008 2009 2010
Blow-By Racing is not responsible for any prices changes, mis-mark items , or any other mis-printed items.